Quick shot is a setting that sets Leaf River apart from other game cameras, it helps in
maximizing the cameras effectiveness. The user can choose 1,2 or 3 shots, which allows the camera
to capture animals that might be following one another. One example might be a Buck following a
doe down a trail, the doe crosses the cameras path first so the camera captures her picture,
instead of the camera going into it's set pause time before capturing another picture, our camera
stores the image just taken then keys up to capture another image. In doing this, the camera does
not miss the buck that comes by a short time after the doe, even better it also captures the
larger buck that might be following behind both deer.
Here are three examples of pictures taken in succession utilizing our Quick Shot Feature.
The early detection sensor helps eliminate missing or just capturing the tail end of an animal
that might cross in front of the camera at a quick pace. The way the sensor works is that it has
five detection zones that detect just within the edge of the picture window and covers the
cameras entire field of view. With this feature the camera is triggered earlier and almost
doubles the amount of time it has to capture the animal's picture opposed to a standard one zone
sensor found in many cameras.
|
Normal cameras have only one motion sensor.
|
Leaf River Cameras have five different motion sensing zones.
|
|
|
We have equipped our camera with a switch with two settings, one for a faster trigger speed and
the other for an extended battery life. This switch can be adjusted without entering the camera's
menus. The fast trigger setting is designed for the user to set the camera up in an area that
animals are going to be passing though at a quicker pace and only has a limited amount of time to
capture the picture, such as a trail. The Battery Save setting allows the user to set the camera
up in a remote location and leave it for months at a time without the use of a solar panel or
external power supply.
In our camera's we offer a built in Viewing screen for easier menu navigation and in-field
viewing. This screen allows you to Delete or Protect the images the camera has captured right in
the field without the need for an external viewing source. You can also Zoom in up to 4x and pan
around the picture for a closer look at the subject or the date & time.
